Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4
Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix
Administration Overview
maximum of 12 ports with no networking ports, or 8 ports with one networking
port.
Switches with R7 or greater software recognize the TN568 circuit pack as a
DEFINITY AUDIX system. This recognition is called native mode and helps
service technicians more quickly recognize a DEFINITY AUDIX system when
diagnosing alarms or other problems. See the table below for the circumstances
in which native mode support exists.
Digital Networking Availability
To enable networking, you must administer voice ports as digital stations,
although the DEFINITY AUDIX circuit pack may be administered on the switch in
either DS or CL integration. DEFINITY AUDIX Version 4.0 supports only one
digital networking port. To administer digital networking, you can not administer
more than 8 voice ports on the DEFINITY AUDIX system.
Summary of Integrations, Emulations, and
Capacities
The following table lists the various combinations of integration, emulation, and
capacities available when administering the switch to work with the DEFINITY
AUDIX system
Table 4-5. Summary of Integration, Emulations, and Capacities
Switch
Version
Integration
G3V2/V3V4
CL
/R5/R6
CL
DS
R7 or
CL
greater
CL
DS
Native
Emulation
(y/ n)
TN2181 (Digital)
no
TN746 (Analog)
no
TN2181 (Digital)
no
TN2181 (Digital)
yes
TN746 (Analog)
yes
TN2181 (Digital)
yes
TN568
Networking
max pts
(y/n)
vm / net
yes
12/0
8/1
no
12/0
yes
12/0
8/1
yes
12/0
8/1
no
12/0
yes
12/0
8/1
Issue 1
May 1999
4-5