Task 7-3: Add Magneto-Optical Disks - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5 Initial Definity AUDIX Administration
Add Magneto-Optical Disks
Figure 5-13. System-Parameters Features Screen (page 3)
6. Move the cursor to any of the fields and change announcement sets or
change rescheduling increments as needed.
7. When you have completed all the changes, press
changes.
8. Press
9. If any of the features that you just activated require special administration
as specified on
AUDIX System — Administration , 585-300-507, for details.
10. Proceed to
Task 5-3: Add Magneto-Optical Disks
The DEFINITY AUDIX system order included two blank magneto-optical disk
cartridges. In
administrator or put it in a safe place for nightly backups. You should still have
the second blank disk cartridge. This cartridge is for the first nightly backup.
1. Referring to
magneto-optical disk drive with the front face to the left.
(Enter) again.
F3
Worksheet
Task 5-3.
Task 2-5, you gave one of these disk cartridges to the system
Figure 5-14, insert the blank disk cartridge into the
C-7, see the appropriate tasks in DEFINITY
Issue 1
May 1999
5-19
(Enter) to save the
F3