Switch Recorded Announcement - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
6 Optional Switch Feature Administration

Switch Recorded Announcement

Switch Recorded Announcement
The following procedure is used to provide a recorded announcement at the
switch for anyone who accesses the DEFINITY AUDIX system, either through a
direct call or through call redirection. The announcement is heard when all the
DEFINITY AUDIX system voice ports are busy and calls start entering the
DEFINITY AUDIX system queue. Refer to
required to administer this feature.
NOTE:
A TN750 Announcement circuit pack must be installed on the switch or a
customer-provided external system must be wired to a vacant analog port
for this feature to work.
The figure below shows the Recorded Announcements Screen for Generic 3r.
The administration screen may look slightly different for other switches or switch
releases.
Figure 6-1. Example of a Recorded Announcements Screen (R5si)
Worksheet D-5 for the information
Issue 1
May 1999
6-6