Duplicating The Stations - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4 Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix
Administering the Voice Ports as Stations
add station 31012
DISPLAY BUTTON ASSIGNMENTS
1: normal
2: inspect
3: date-time
4: directory
5: cov-msg-rt
6: next
7: delete-msg
Figure 4-16. Display Button Assignments Screen
2. Assign the display buttons on the Display Button Assignments screen as
shown above.
3. Press
4. Continue with
Task 4-5E: Duplicating the Stations
1. Duplicate port 12 using the duplicate function of your administration tool to
create ports1 through 5.
For example, enter duplicate station extension
where extension is the extension for voice port 12.
2. Type the Extension, Port and Name field for each voice port created.
3. Press
4. For voice port 5,enter change station extension, where extension is the
extension of the voice port.
5. Change the Restrict Last Appearance field to n
and bridge button 10 of voice port 5 to button 10 of voice port 12
4-5B).
6. Duplicate port 5 to create ports 6 through 11.
STATION
to complete the Station screen.
ENTER
Task 4-5E.
to save the new voice ports.
ENTER
Issue 1
May 1999
Page 5 of 5 SPE A
(Task 4-5A),
(Task
4-32