What You Must Know Before You Begin This Chapter; Translation Overview Tables; Station Screen - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

For g3i/g3s/g3vs/r5vs/r5si/prologix switches, tn2181 emulation, display set integration
Hide thumbs Also See for DEFINITY AUDIX:
Table of Contents

Advertisement

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4
Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix

What You Must Know Before You Begin This Chapter

What You Must Know Before You
Begin This Chapter
Before you begin this chapter, you must know which options the DEFINITY
AUDIX system is using. You can dial into the DEFINITY AUDIX system and enter
display system-parameters customer-options to view the following
information.
The number of voice ports.
Whether the system is using Display Set (DS) switch integration or Control
Link (CL) switch integration.
Whether digital networking is used. Digital networking can only be used
with 8 or fewer voice ports. Digital port emulation (TN754 or TN2181) is
required.
Whether digital port emulation (TN754 or TN2181) or analog port
emulation (TN746) is used. We recommend that customers who currently
have analog port emulation switch to digital port emulation. Analog port
emulation may have been used on earlier releases of the DEFINITY AUDIX
system . See
you want to change the type to digital port emulation.

Translation Overview Tables

Use the following tables to check the translations on the switch for the DEFINITY
AUDIX system. Each table lists the required field values for the relevant switch
administration screens.
!
CAUTION:
Do not use the following tables to administer DEFINITY AUDIX on the switch
unless you are very experienced with this installation. Instead, refer to the
tasks following the tables for detailed instructions.
Table 4-1. Field Values for Voice Port Assignments: TN2181 emulation
Field
Circuit Pack screen; Code:
first slot
Circuit Pack screen; Code:
second slot
Station screen; Type
Appendix I
if analog port emulation was used previously and
G3V2–V4/R5/R6
blank
TN2181
7405D
Issue 1
May 1999
R7 or Greater
ADX12D
TN568
ADX16D
4-2

Advertisement

Table of Contents
loading

Table of Contents