Worksheet C-8: Add Subscribers - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
C DEFINITY AUDIX System Administration Worksheets
Add Subscribers

Worksheet C-8: Add Subscribers

Date
Prepared By
Contact Telephone Number
The information you supply here will be input on the SUBSCRIBER and COS
screens during cut-to-service administration. Complete the following information
for each subscriber to be added to the DEFINITY AUDIX database during
cut-to-service administration. The minimum information needed to add a
subscriber to the DEFINITY AUDIX database is a name and an extension for the
subscriber. The DEFINITY AUDIX system will supply defaults for all the remaining
fields on the SUBSCRIBER screen.
You must administer the following information for each subscriber to be added to
the DEFINITY AUDIX system database:
Subscriber name
Subscriber extension
Initial password
Class of Service (COS) — 12 classes of service can be defined for the
DEFINITY AUDIX system; see DEFINITY AUDIX System — Administration,
585-300-507 and DEFINITY AUDIX System -- System Description ,
585-300-214 for more information on COS. Values for the default COS,
found on the Change Subscriber screen (page 2) and the Change COS
screen, appear on the next page.
Miscellaneous
Switch ID —The number identifying the switch on which the subscriber is
administered. (The default value represents the local switch.) Enter ø if
there is no station on the switch. In this case, no lamp updates will be
performed.
Covering extension
Community ID — The number identifying the community of subscribers to
which this subscriber will belong; community ID can be used to
administer, for example, message sending restrictions.
Broadcast Mailbox
_________________________
_________________________
_________________________
Issue 1
May 1999
C-11