Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5
Initial Definity AUDIX Administration
Worksheets Needed
Initial Definity AUDIX
Administration
This chapter describes the initial tasks required to administer the DEFINITY
AUDIX System.
The initial system administration tasks for the DEFINITY AUDIX system are:
Task 5-1 - "Perform Initial DEFINITY AUDIX Administration"
Task 5-2 - "Activate Parameters and Basic Features"
Task 5-3 - "Add Magneto-Optical Disks"
Task 5-4 - "Check the Status of the Switch Names Audit"
Task 5-5 - "Check Alarm Status"
Worksheets Needed
Before beginning these tasks, make sure you have completed the following
worksheets (included as appendices).
Worksheet B-1: Administer the Voice Ports as Stations (Digital Port
Emulation)
Worksheet B-2: Assign the Hunt Group (Digital Port Emulation)
Worksheet B-3: Assign the Call Coverage Path for Voice Ports (Digital Port
Emulation)
Worksheet B-4: Assign the Call Coverage Path for Subscribers (Digital
Port Emulation)
Worksheet C-3: Assign the DEFINITY AUDIX Machine ID
Worksheet C-5: Set System Parameters Limits
Worksheet C-6: Assign the Time Zone
Worksheet C-7: Activate Parameters and Basic Features
Worksheet C-8: Add Subscribers
Issue 1
May 1999
5-1
5