Worksheet A-2: Port Slot Assignments; (For Carrier Rearrangement - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
A Switch Carrier Configuration Worksheets
Port Slot Assignments (For Carrier Rearrangement)

Worksheet A-2: Port Slot Assignments

(For Carrier Rearrangement)

Date
Prepared by
Contact telephone number
Complete the following worksheet to indicate how circuit packs should be
arranged in the switch carrier before the DEFINITY AUDIX system is installed. On
the worksheet, the slots are numbered as seen from the front of the carrier, with
slot 1 on the far left and slot 20 on the far right.
worksheet for all existing circuit packs. Specify only the new positions of circuit
packs that must be moved (if any) and then indicate the two slots the DEFINITY
AUDIX system is to occupy.
Use the information in this appendix to determine the carrier into which the
DEFINITY AUDIX system should be installed.
Carrier A
Carrier
Function
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 10
Slot 11
Slot 12
Slot 13
Slot 14
Slot 15
Slot 16
Slot 17
4. The slot order is different for a ProLogix. The Prologix is a stacked cabinet with slot 1 - 5 on
the bottom, and slots 6 - 10 on top.
Carrier B Carrier C
_________________________
_________________________
_________________________
4
It is not necessary to fill in the
Carrier D Carrier E
Issue 1
May 1999
A-4