Tn2181 (Digital Port) Emulation, Display Set Integration; Task 6-1: Identifying The Definity Audix Circuit Pack - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

For g3i/g3s/g3vs/r5vs/r5si/prologix switches, tn2181 emulation, display set integration
Hide thumbs Also See for DEFINITY AUDIX:
Table of Contents

Advertisement

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
4
Initial Switch Administration: G3i/G3s/G3vs/R5vs/R5si/ProLogix

TN2181 (Digital Port) Emulation, Display Set Integration

TN2181 (Digital Port) Emulation,
Display Set Integration
The tasks in this chapter administer the DEFINITY AUDIX system to emulate the
TN2181 digital port circuit pack on the switch using DS integration.
Complete the following tasks to administer the voice ports on the switch.
Identifying the DEFINITY AUDIX Circuit Pack
Defining the Call Coverage Path for Voice Ports
Defining Call Coverage Paths for Subscribers
Administering the Voice Ports as Stations
Assigning Voice Ports to the Hunt Group
Administering the Digital Networking Port (Optional)
Task 4-1: Identifying the DEFINITY
AUDIX Circuit Pack
When the DEFINITY AUDIX system circuit pack is in place in the carrier, the
switch recognizes the circuit pack and the circuit pack information appears on
the circuit pack screen. You do not have to administer anything.
However, when you first install the DEFINITY AUDIX system or change the circuit
pack emulation, you should ensure that the switch identifies the correct circuit
pack emulation. To check the DEFINITY AUDIX system circuit pack on the switch,
obtain the port slot assignment from
completed this worksheet with the customer during the planning phase for the
DEFINITY AUDIX system.
The DEFINITY AUDIX circuit pack is a TN568. The DEFINITY AUDIX R4.0
occupies two port slots on the switch (one port slot on a ProLogix if placed in slot
6), and the TN568 circuit pack occupies the second of the two slots (first slot if
placed in ProLogix slot 6).
Figure 4-1
The TN568 circuit pack resides in the second slot, Slot 9.
shows the DEFINITY AUDIX system in slots 8 and 9 of a switch carrier.
Worksheet
A-2. The program manager
Issue 1
May 1999
4-6

Advertisement

Table of Contents
loading

Table of Contents