Worksheet B-3: Assign The Call Coverage Path; For Voice Ports (Digital Port Emulation - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
B Switch Administration Worksheets
Assign the Call Coverage Path for Voice Ports (Digital Port Emulation)

Worksheet B-3: Assign the Call Coverage Path

for Voice Ports (Digital Port Emulation)

Date
Prepared By
Contact Telephone Number
The following information is required to define call coverage paths for the
DEFINITY AUDIX voice ports.
Coverage Path Number
Use the same coverage path number as Worksheet B-1.
Coverage Criteria
Station/Group Status Active? (Inside Call/Outside Call)
Coverage Criteria
Busy? (Inside Call/Outside Call)
Coverage Criteria
Don't Answer? (Inside Call/Outside Call)
Coverage Criteria
All? (Inside Call/Outside Call)
SAC/Go to Cover? (Inside Call/Outside Call)
Next Path Number
If desired, enter the second path to which calls will be directed in
case the current path fails.
Number of Rings
Coverage Points
Point1
Enter h followed by the DEFINITY AUDIX hunt group number from
Worksheet B-2.
_________________________
_________________________
_________________________
[n/n]
[n/n]
[n/n]
[y/y]
[n/n]
use the default
Issue 1
May 1999
B-8