C: Assign The Definity Audix Machine Parameters - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
5 Initial Definity AUDIX Administration
Perform Initial DEFINITY AUDIX Administration
5. Continue with
Task 5-1C: Assign the DEFINITY AUDIX
Machine Parameters
Use information from
1. With the cursor on the DEFINITY AUDIX command line, enter change
machine
The system displays the Machine Profile screen.
.
Figure 5-3. Machine Profile screen
2. Move the cursor to the Machine Name field and type the new name to be
assigned to this DEFINITY AUDIX system. The machine name must be
from one to eight characters in length.
3. Verify that the Machine Type field displays audix. If not, move the cursor
to that field and type audix
4. Move the cursor to the Extension Length field and type the number of
digits that the extensions on this DEFINITY AUDIX system will have.
Task 5-1C.
Worksheet C-3 to complete this task.
Issue 1
May 1999
5-6