Verifying The Circuit Pack; Re-Administering The Voice Ports; Changing The Hunt Group; Assigning The Data Link - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

For g3i/g3s/g3vs/r5vs/r5si/prologix switches, tn2181 emulation, display set integration
Hide thumbs Also See for DEFINITY AUDIX:
Table of Contents

Advertisement

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
I
Changing Switch Integrations, Port Emulations, and Number of Voice Ports
Changing from DS Integration — Digital to CL Integration — Digital

Verifying the Circuit Pack

1. At the switch administration terminal, enter list configuration board slot
where slot is the port location of the DEFINITY AUDIX TN568 circuit pack.
If you do not know the slot location of the DEFINITY AUDIX circuit pack,
enter list configuration to display the circuit packs for the switch. Look for
a TN754 or TN2181 code.
2. Verify that the circuit pack is recognized as a TN754, TN2181 or TN568
circuit pack.
If the circuit pack is not recognized correctly, enter change circuit-packs
cabinet to display the circuit pack form. Conflict markers ( # sign) most likely will
display to the right of the Code field on the circuit pack form for the two slots
occupied by the DEFINITY AUDIX system. Refer to
instructions on changing the DEFINITY AUDIX circuit pack designation.

Re-administering the Voice Ports

Reset Page 3 of the Station screen for the voice ports to show the following

feature buttons:

For more information on voice port administration, see the instructions on adding
digital voice ports in

Changing the Hunt Group

Refer to
Task 4-6
DEFINITY AUDIX system. You will change the hunt group instead of adding the
hunt group.
1. Enter change hunt-group number
2. Make changes to page 1 of the Hunt Group screen (also page 2 for
G3r/R5r). In most cases, you will change the Message Center name
from none to audix.

Assigning the Data Link

Refer to
Chapter 4
AUDIX system.
1: lwc-store
2: lwc-cancel
3: aux-work Grp: XX
Task 4-5
in
in
Chapter 4
for instructions on assigning the hunt group for the
for instructions on assigning the data link for the DEFINITY
Task 4-1
Chapter
4.
Issue 1
May 1999
I-11
in
Chapter 4
for

Advertisement

Table of Contents
loading

Table of Contents