Initial Subscriber Administration Tasks; Worksheets Needed; Task 10-1: Optimize The Class Of Service (Cos) Values; Task 10-2: Add The Initial Subscribers - Lucent Technologies DEFINITY AUDIX Installation And Administration Manual

For g3i/g3s/g3vs/r5vs/r5si/prologix switches, tn2181 emulation, display set integration
Hide thumbs Also See for DEFINITY AUDIX:
Table of Contents

Advertisement

Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
8
Initial Subscriber Administration

Initial Subscriber Administration Tasks

Initial Subscriber Administration
This chapter describes the tasks required to administer the initial subscribers.
Initial Subscriber Administration
Tasks
This chapter contains the following tasks:
Task 8-1 - "Optimize the Class of Service (COS) Values"
Task 8-2 - "Add the Initial Subscribers"
Task 8-3 - "Complete Initial Administration"
Task 8-1
and
administrator or by the Lucent Software Specialist (SS), depending on the terms
of the customer contract.
Task 8-3
is completed by either the DEFINITY AUDIX system administrator or SS
and the Remote Support Center.
Task 8-3
is completed by either the system administrator or the SS administering
the initial subscribers. This task reminds the administrator to perform the initial
administration tasks described in DEFINITY AUDIX System — Administration ,
585-300-507.

Worksheets Needed

Before beginning these tasks, make sure you have
Subscribers. The worksheet is included as an appendix in this document.
Task 8-2
are completed by either the DEFINITY AUDIX system
8
Worksheet C-8: Add
Issue 1
May 1999
8-1

Advertisement

Table of Contents
loading

Table of Contents