Installation and Switch Administration for G3i/G3s/G3vs/R5vs/R5si/ProLogix
Switches, TN2181 Emulation, Display Set Integration 585-300-122
2
Hardware Installation
Install the Terminals
3. Continue with
Task 2-3D: Installing an Additional
Administration
Terminal via 7400A Data Modules
This task describes how to connect a terminal via 7400A data modules to Port B,
although the same procedure can be used to connect the terminal to Port A.
Refer to
Figure 2-10
If the terminal is installed correctly and the DEFINITY AUDIX system
is in the AUDIX state, the screen displays the login prompt.
If the terminal does not display the login prompt when the DEFINITY
AUDIX system is in the AUDIX state, try pressing
times. If the login prompt still does not appear, see the
troubleshooting procedures for terminal connections in DEFINITY
AUDIX System — Maintenance , 585-300-121.
Task 2-4
(DS integration).
when performing this task.
Issue 1
May 1999
2-21
a few
RETURN