Task 14D: Administer Voice Ports - Lucent Technologies DEFINITY AUDIX Installation And Upgrade

Task 14: Perform Initial DEFINITY AUDIX Administration
This audit takes about 1-2 seconds. Run the audit as described below.
1. With the cursor on the DEFINITY AUDIX command line, type audit
switch-translations and press
The system displays the Audit Results screen
2. Press the
3. When the audit is complete (in a few seconds) proceed to Task 14D:
Administer Voice Ports. If the audit does not complete successfully, see
DEFINITY AUDIX System — Maintenance book, 585-300-110.

Task 14D: Administer Voice Ports

This task is required for all configurations.
The voice ports and extensions that you administer in this task must match the
ports and extensions that you administered on the switch. See Worksheet B-1 (for
DS integrations) or B-5 (for CL integrations) for the correct values. Both
worksheets are named Administer Voice Ports as Stations .
1. With the cursor on the DEFINITY AUDIX command line, type change
voice-group and press
RETURN
(F3) function key to begin the audit.
ENTER
.
RETURN
.
.
Issue 2 December 1996
3-15