How to create a Wi-Fi VLAN interfaces to separate staff
network and Guest network
This example shows how to create Wi-Fi VLAN interfaces to separate staff network and
Guest network. Suppose there should be no limitation for the staff network, but restrict
the guests not access the USG.
Staff
Network
Guest
SSID:
Network
Staff_WiFi
Figure 290
Separate the Staff and Guest network
SSID:
Network
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This example
Guest_WiFi
172.16.0.1
was tested using USG210 (Firmware Version: ZLD 4.20)
Network
Netmask
172.17.0.1
255.255.25
Netmask
5.0
255.255.25
5.0
USG
WAN IP
10.251.3
0.94
LAN IP
192.168.
1.1
www.zyxel.com
int
er
ne
t
194/255