Radius Server Summary - ZyXEL Communications ZyWALL 110 User Manual

Table 277 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add (continued)
LABEL
Retype to Confirm Retype your new password for confirmation.
Realm
NetBIOS Name
Configuration
Validation
OK
Cancel

35.9.6 RADIUS Server Summary

Use the RADIUS screen to manage the list of RADIUS servers the ZyWALL/USG can use in
authenticating users.
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen.
Figure 426 Configuration > Object > AAA Server > RADIUS
The following table describes the labels in this screen.
Table 278 Configuration > Object > AAA Server > RADIUS
LABEL
Add
Edit
Remove
Object
References
#
Name
Server Address
Chapter 35 Object
DESCRIPTION
This is only for Active Directory.
Enter the realm FQDN.
This is only for Active Directory.
Type the NetBIOS name. This field is optional. NetBIOS packets are TCP or UDP packets
that enable a computer to connect to and communicate with a LAN which allows local
computers to find computers on the remote network and vice versa.
Use a user account from the server specified above to test if the configuration is correct.
Enter the account's user name in the Username field and click Test.
Click OK to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field displays the index number.
This is the name of the RADIUS server entry.
This is the address of the AD or LDAP server.
ZyWALL/USG Series User's Guide
635