The Session Control Screen - ZyXEL Communications ZyWALL 110 User Manual

Table 157 Configuration > Security Policy > ADP > Profile > Add-Protocol-Anomaly
LABEL
Log
Action
OK
Cancel
Save

21.6 The Session Control Screen

Click Configuration > Security Policy > Session Control to display the Security Policy
Session Control screen. Use this screen to limit the number of concurrent NAT/Security Policy
sessions a client can use. You can apply a default limit for all users and individual limits for specific
users, addresses, or both. The individual limit takes priority if you apply both.
Figure 253 Configuration > Security Policy > Session Control
Chapter 21 Security Policy
DESCRIPTION
These are the log options. To edit this, select an item and use the Log icon.
This is the action the ZyWALL/USG should take when a packet matches a policy.
To edit this, select an item and use the Action icon.
Click OK to save your settings to the ZyWALL/USG, complete the profile and
return to the profile summary page.
Click Cancel to return to the profile summary page without saving any changes.
Click Save to save the configuration to the ZyWALL/USG but remain in the same
page. You may then go to the another profile screen (tab) in order to complete
the profile. Click OK in the final profile screen to complete the profile.
ZyWALL/USG Series User's Guide
380