Ipnp Screen - ZyXEL Communications USG40 User Manual

25.2 IPnP Screen

This screen allows you to enable IPnP on the ZyWALL/USG and specific internal interface(s). To
access this screen click Configuration > Hotspot > Network > IPnP.
Figure 348 Configuration > Hotspot > Network > IPnP
The following table describes the labels in this screen.
Table 186 Configuration > Hotspot > Network > IPnP
LABEL
Enable IPnP
Member List
Hotspot License
Status
License
Status
License Type
Expiration
Date
Apply
Reset
Chapter 25 IPnP
DESCRIPTION
Select this option to turn on the IPnP feature on the ZyWALL/USG.
Note: You can enable this feature only when the security policy is enabled.
The Available list displays the name(s) of the internal interface(s) on which you can
enable IPnP.
To enable IPnP on an interface, you can double-click a single entry to move it or use the
[Shift] or [Ctrl] key to select multiple entriess and click the right arrow button to add to the
Member list. To remove an interface, select the name(s) in the Member list and click the
left arrow button.
This field displays whether the service is activated (Licensed) or not (Not Licensed).
This shows whether you have a trial or standard license or none (Trial, Standard, None).
This shows when your hotspot license will expire.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
499