Ip/Mac Binding Exempt List - ZyXEL Communications USG40 User Manual

Figure 202 Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
Table 121 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL
Interface Name
IP Address
MAC Address
Description
OK
Cancel

15.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the
ZyWALL/USG does not apply IP/MAC binding.
Figure 203 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 122 Configuration > Network > IP/MAC Binding > Exempt List
LABEL
Add
Edit
Chapter 15 IP/MAC Binding
DESCRIPTION
This field displays the name of the interface within the ZyWALL/USG and the interface's
IP address and subnet mask.
Enter the IP address that the ZyWALL/USG is to assign to a device with the entry's MAC
address.
Enter the MAC address of the device to which the ZyWALL/USG assigns the entry's IP
address.
Enter up to 64 printable ASCII characters to help identify the entry. For example, you
may want to list the computer's owner.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving.
DESCRIPTION
Click this to create a new entry.
Click an entry or select it and click Edit to modify the entry's settings.
ZyWALL/USG Series User's Guide
294