Chrysler 1997 Stratus Convertible RHD Service Manual page 37

TROL SHOCK CONTROL SHOCK ARM ABSORBER/CON- ABSORBER/UPPER ARM MOUNTING BRACKET SPRING COMPRES- MOUNTING BRACKET WASHER CROW FOOT
JX
REMOVAL AND INSTALLATION (Continued)
Fig. 19 Shock Absorber Shaft Nut Removal
Fig. 20 Shock Absorber Rod Upper Washer
(15) Remove the shock absorber/upper control arm
mounting bracket from the shock absorber assembly
(Fig. 21).
Fig. 21 Shock Absorber/Upper Control Arm
Mounting Bracket
SOR ISOLATOR BUSHING SHOCK SOCKET SNAP-ON A136 SHOCK ABSORBER ABSORBER LOWER SHOCK TROL ARM ISOLATOR BUSHING ABSORBER/CON-
CAUTION:
shock absorber rod are unique to the position
which they are installed on the rod. When removing
the bushings from the rod, attention must be paid
to their location so they will be installed correctly
when shock absorber is assembled.
(16) Remove the shock absorber rod upper isolator
bushing (Fig. 22) from the shock absorber/upper con-
trol arm mounting bracket.
Fig. 22 Shock Absorber Rod Upper Isolator Bushing
(17) Remove the shock absorber rod lower isolator
bushing and sleeve (Fig. 23) from the shock absorber/
upper control arm mounting bracket. Then remove
upper spring isolator (Fig. 23) from mounting
bracket.
Fig. 23 Shock Absorber Rod Lower Isolator Bushing
(18) Remove the 2 bolts (Fig. 24) attaching the
upper control arm to the bushings in the upper con-
trol arm mounting bracket.
(19) Remove the upper control arm from the
mounting bracket.
MOUNTING BRACKET SHOCK UPPER ISOLATOR BUSHING ABSORBER SHOCK SLEEVE ROD ABSORBER/CONTROL
SUSPENSION
The top and bottom bushings for the
And Sleeve
MOUNTING BRACKET UPPER SPRING ISO- ARM LATOR
2 - 15