Chrysler 1997 Stratus Convertible RHD Service Manual page 36

Table of Contents

Advertisement

CONTROL ARM MOUNTING
SHOCK
ABSORBER/UPPER
BRACKET BOLTS
SHOCK TOWER
COVER
THRU-BOLT
2 - 14
SUSPENSION
REMOVAL AND INSTALLATION (Continued)
Fig. 15 Clevis To Lower Control Arm Attaching
(8) Remove the clevis from the shock absorber by
carefully tapping it off the shock absorber using a
soft (brass) drift.
(9) Remove the 4 bolts (Fig. 16) attaching the
upper control arm/shock absorber mounting bracket
to the shock tower of the vehicle.
Fig. 16 Shock Absorber Attachment To Shock Tower
(10) Remove the shock absorber and upper control
arm mounting bracket as an assembly from the vehi-
cle.
CAUTION: Do not clamp the shock absorber in a
vise by the body of the shock absorber. The clevis
bracket must be reinstalled on the shock absorber
clamped in the vise using the clevis bracket.
(11) Install clevis bracket back on shock absorber
and tighten pinch bolt. Then using the clevis bracket,
clamp the shock absorber assembly in vise, with
shock absorber in a vertical position (Fig. 17).
WARNING: DO NOT REMOVE SHOCK ABSORBER
ROD NUT, BEFORE SHOCK ABSORBER COIL
SHOCK ABSORBER
CLEVIS
LOWER
TIE ROD END
GP A20
GP C42 TOP SPRING SHOE
BOTTOM
CONTROL
ARM
SPECIAL
SHOCK
ABSORBER
GP-2020–C3.5
ASSEMBLY
Fig. 17 Shock Absorber Correctly Mounted In Vise
SPRING IS COMPRESSED, REMOVING SPRING
TENSION FROM UPPER CONTROL ARM/SHOCK
ABSORBER MOUNTING BRACKET.
WARNING:
FOR REMOVAL FROM SHOCK ABSORBER, THE
FIRST FULL TOP AND BOTTOM COIL OF THE COIL
SPRING MUST BE CAPTURED BY THE JAWS OF
THE COIL SPRING COMPRESSOR.
(12) Compress shock absorber coil spring, using
Professional Services Equipment Spring Compressor,
GP-2020-C3.5 fitted with the GP-C42 top spring shoe
and the GP-A20 bottom spring shoe (Fig. 18).
Fig. 18 Compressing Shock Absorber Coil Spring
(13) Hold the rod of the shock absorber from rotat-
ing using Shock Absorber Socket, Snap-On A136 or
an equivalent (Fig. 19). Then remove the shock
absorber shaft nut.
(14) Remove the washer (Fig. 20) from shock
absorber rod.
SPRING
SHOE
TOOL
WHEN COMPRESSING COIL SPRING
ABSORBER
SHOCK
VISE
CLEVIS
JX

Advertisement

Table of Contents
loading

This manual is also suitable for:

1997 stratus convertible lhd

Table of Contents