Measuring The Thickness - Omron ZW-C1*AT User Manual

Measuring the Thickness

If you have glass of known thickness, scaling can be adjusted referenced to that glass so that transparent
objects can be measured more easily.
Edge 1st
Edge 2nd
Item Setting item
Thickness Measurement
settings area
Measurement
surface 1
Measurement
surface 2
 Explorer pane
 Edit pane
 Task Settings window : [Measurement mode] - [Thickness]
1
Select the measurement area targeted for
measurement from [Measurement area].
2
Select the measurement surface (top
surface) targeted for measurement from
[Measurement surface 1].
3
Select the measurement surface (rear
surface) targeted for measurement from
[Measurement surface 2].
Note
• Thickness measurement can also be set by the operating keys on the Sensor Controller.
Measuring the Thickness p.306
• For the operation of the thickness scaling, refer to p.92.
ZW User's Manual
Sensor head
Transparent
object
Thickness
Setting value
Area 1 (default value)/Area 2
Edge1/Edge2/Edge3/Edge4/
peak (default value)
Edge1/Edge2/Edge3/Edge4/
peak (default value)
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
The area targeted for measurement can be switched.
The measurement surface (top surface) targeted for
measurement can be switched.
The peak is the surface of all measurement surfaces having
the highest received light amount.
The measurement surface (rear surface) targeted for
measurement can be switched.
The peak is the surface of all measurement surfaces having
the highest received light amount.
)
Setting Measurement Items
85