Switching Banks
Switches banks.
1
Click the bank group on the Explorer pane to
open.
2
Select the bank data to switch and double
click or right click it to select the Edit menu.
The bank in the Bank data edit pane that is
active on the Edit pane becomes the current
bank.
Important
You can also switch the bank by entering the non-procedural command or from SmartMonitor ZW.
Current bank data setting command <BS command> p.242
SmartMonitor ZW Operation Manual
Note
Switching Banks can also be set by the operating keys on the Sensor Controller.
Switching Banks p.326
64
Bank switching
ZW User's Manual