Omron ZW-C1*AT User Manual page 246

Zero reset cancel command <ZC command>
Cancel the zero reset of the specified task.
<Command format>
Z C
↑
Space
<Response format>
Normal processing
O K CR
• If the task number is omitted, the zero reset is canceled for the task of which the result is currently displayed.
• If "4" is set for the task number, the zero reset is canceled for all tasks.
When a command was not successfully processed
E R CR
<Parameter explanation>
Parameter
Task number
244
No-protocol Connection
CR
↑
Task number
Description
Specifies the number of the task for which the zero reset is to be cancelled.
0: TASK1
1: TASK2
2: TASK3
3: TASK4
4: TASK1 to 4
ZW User's Manual