Assigning Analog Output
Set the task for which to output the results as analog.
Item
Setting item
Analog output
Output object
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.61
Explorer pane
Edit pane
I/O Setting Screen
2
Select the task from [Output object].
You can select from the above setting values.
None/TASK1/TASK2/TASK3/TASK4
Note
Analog output can also be assigned with key operations on the Sensor Controller.
Assigning Analog Output p.339
ZW User's Manual
Setting value
None/TASK1/TASK2/TASK3/
TASK4
: [Bank] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Analog output]
Description
Select the task to output as analog.
)
Parallel I/O connection
141