Omron ZW-C1*AT User Manual page 259

OUT IP address setting of the specified socket number <OS command>
Sets the OUT IP address.
<Command format>
O S
↑ ↑
Space Space
↑
Socket number
<Response format>
Normal processing
O K CR
When a command was not successfully processed
E R CR
<Parameter explanation>
Parameter Description
Socket number Specifies the socket number of which the serial data is to be output.
1: Socket 1 (fixed at 192.168.250.100)
2: Socket 2
3: Socket 3 (fixed at 192.168.250.100)
4: Socket 4 (fixed at 192.168.250.100)
(*1) Sockets 3 and 4 are not used for serial data output.
(*2) Sockets 1, 3 and 4 are fixed and cannot be set by this command. Note, however, that
OK is returned as the response.
ZW User's Manual
1 9 2 . 1 6 8 . 2 5 0 . 1 0 0
No-protocol Connection
CR
257