Omron ZW-C1*AT User Manual page 269

3
Specify the measurement result file for
performing offline debugging.
Edit pane: [Tools] - [Simulation data] - [Specify a
file]
Select the CSV file that is written in the following
format.
You can also import files saved in the internal
logging and trend graphs.
index, Task1, Task2, Task3, Task4
0,MV, MV, MV, MV
1,MV, MV, MV, MV
2,MV, MV, MV, MV
:
(MV: Measurement Value)
4
Select [Simulation] - [Execute].
The simulation will start.
After the Simulator is connected, the NJ-series Controller and ZW Simulator will be internally connected online
via EtherCAT and the NJ-series Controller will enter RUN mode.
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for the operating procedures for the
Simulator.
ZW User's Manual Offline Debugging of the Sensor Control Program and Sensor Operation
267