Measuring the Thickness
If you have glass of known thickness, scaling can be adjusted referenced to that glass so that transparent
objects can be measured more easily.
Edge 1st
Edge 2nd
Item
Setting item
Thickness
Measurement
settings
surface 1
Measurement
surface 2
Explorer pane
→ Edit pane
→ Task Settings window : [Measurement mode]
1
Select [Thickness] in [Measurement mode].
2
Select the measurement surface (top
surface) targeted for measurement from
[Measurement surface 1].
3
Select the measurement surface (rear
surface) targeted for measurement from
[Measurement surface 2].
Note
• Thickness measurement can also be set by the operating keys on the Sensor Controller.
Measuring the Thickness p.199
• For the setting of measurement area to control of light adjustment, refer to the following:
Setting Light Exposure Time Control Mode p.102
Setting Exposure Time Control Mode p.197
106
Setting Measurement Items
Sensor head
Transparent
object
Thickness
Setting value
Edge1/Edge2/Edge3/Edge4/
Peak (default value)
Edge1/Edge2 /Edge3/Edge4/Peak
(default value)
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
The measurement surface (top surface) targeted for
measurement can be switched.
The peak is the surface of all measurement surfaces having
the highest received light amount.
The measurement surface (rear surface) targeted for
measurement can be switched.
The peak is the surface of all measurement surfaces having
the highest received light amount.
)
ZW-7000 User's Manual