Processing unit data acquisition command <DG command>
Acquires the measurement data and setting data of the processing unit.
<Command format>
D
G
↑
Space
↑
Unit number
<Response format>
Normal processing
↑
Data (N letter)
When a command was not successfully processed
E
R
CR
<Parameter explanation>
Parameter
Description
Unit number
Specifies the unit number (0 to 255) to be acquired.
Data number
Specifies the data number (0 to 255) to be acquired.
Important
For unit numbers and data numbers, refer to "10-3 Processing Item Data List" (p.384).
ZW User's Manual
CR
↑
Space
↑
Data number
CR
No-protocol Connection
239