● Settings in the ZW (Device Parameter Settings)
Parameter name
001 Input Size
002 Output Size
*
003 RPI
* The packet interval (RPI) is set in the connection settings between the PLC and the Sensor. No setting is required here.
1
Right-click the ZW in the network on the Network Configurator and select [Parameter] - [Edit].
2
The Edit Device Parameters Dialog Box will be displayed. Make the required settings.
206
EtherNet/IP Connection
Value
The total size of response area and output area
The data size of command area
The requested packet interval
Setting range
56
24
10000
ZW User's Manual