Omron ZW-C1*AT User Manual page 319

Performing Thickness Scaling
Performing Thickness Scaling p.92
Operating procedure
Steps Key operation
1 to 5 For moving to "SCALE", see steps 1 to 5 in p.314.
6
7
8
9
ZW User's Manual
Display Description
Select "THICK" as the scaling type.
The current setting value is displayed on the sub-display.
Press
Select "THICK" and press the
The current measured value is displayed on the main display and the
current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
Enter the setting value and then press the
"OK/CAN" is displayed on the sub-display.
Press the
Press the
/ key to enter editing mode and the sub-display blinks.
key.
key to enter the editing mode, and the sub-display
/
key to execute scaling or
key for two seconds to enter the RUN mode.
Setting the Output Conditions
/ / keys.
key.
key to cancel.
317