Setting GATE Signal ON Time
Setting default settings for EtherCAT communications p.165
Operating procedure
Steps
Key operation
1
2
3
4
5
6
ZW User's Manual
Display
Description
Press and hold the
Press the
Press the
Press the
Select the GATE signal ON time.
The current setting value is displayed on the sub-display.
Press
To edit numerical values, use the
In this example, input "1", then press the
Press the
key for two seconds to enter the FUN mode.
/
keys to select "SYSTEM" and press the
/
keys to select "COM" and press the
/
keys to select "GATE.TM" and press the
/
key to enter editing mode and the sub-display blinks.
/
/
key for two seconds to enter the RUN mode.
Connecting with EtherCAT
key.
key.
key.
/
keys.
key.
349