Omron ZW-C1*AT User Manual page 141

ZERO input
Name
ZERO input
RESET input
Name
RESET input
TIMING input
Name
TIMING input
LED OFF input
Name
LED OFF input
LOGGING input
Name
LOGGING input
ZW User's Manual
Description
This is used to execute and clear a zero reset.
Description
This resets all executing measurements and outputs.
While a RESET is being input, judgment output conforms to the non-measurement setting.
If this RESET input switches ON while the hold function is used, the state in effect before the
hold function was set will be restored.
Description
This timing input is for signal input from external devices. Use it for hold function timing.
Description
Turn off the measurement LED.
While LED OFF is being input, the analog output and judgment output conform to the non-
measurement setting.
Description
This is used to start internal logging.
Parallel I/O connection
139