Setting Sensing; Setting The Material Of The Target To Measure - Omron ZW-C1*AT User Manual

9-6 Setting Sensing

Setting the Material of the Target to Measure

Setting the Material of the Target to Measure p.75
As an example, here is an explanation of the procedure for the "MIRROR" setting as the material.
Operating procedure
Steps Key operation
1
2
3
4
5
302

Setting Sensing

Display Description
Press and hold the
mode.
Press the
key.
Press the
key.
Select the material.
NORMAL: Normal
MIRROR: Mirror
DIFF: Diffusion surface
The current setting value is displayed on the sub-display.
Press
In this example, select "MIRROR" and press the
Press the
key for two seconds to enter the FUN
/ keys to select "SENS" and press the
/ keys to select "OBJECT" and press the
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
key.
ZW User's Manual