Note
The network settings of the sensor can also be set with key operations on the Sensor Controller.
Network Settings of the Sensor p.350
Switch to EtherNet/IP communication
Explorer pane
Edit pane
1
Select [Ethernet/IP] at [Fieldbus].
Important
To enable the settings, restart the Controller.
Note
The setting of default settings for EtherNet/IP communications can also be set by the operating keys on the Sensor
Controller.
Network Settings of the Sensor p.350
204
EtherNet/IP Connection
: [Device group] | Sensor name | [System] |
[System data] (Double-click)
: [Ethernet Communications Settings] icon (
)
ZW User's Manual