Omron ZW-C1*AT User Manual page 274

Checking Sysmac Error Status
You can use the troubleshooting functions of the Sysmac Studio Standard Version to check the Sysmac error
status. Refer to the NJ-series Troubleshooting Manual (Cat. No. W503) for information on troubleshooting
functions.
1
Select [Troubleshooting] from the Tools Menu while online. You can also click the
[Troubleshooting] Button in the toolbar.
The Troubleshooting Dialog Box is displayed.
2
Click the [Controller Errors] Tab.
A list of the current Sysmac error status and corresponding event codes will be displayed.
Clearing the Sysmac Error Status
1
Remove the cause of the error and then click the [Reset All] Button on the [Controller Errors] Tab
Page of the [Troubleshooting] Pane.
Note
Even if you reset the Sysmac error status, the errors will remain on the [Controller Event Log] Tab Page.
272
Error Messages ZW User's Manual