Entering Project Information - Omron ZW-C1*AT User Manual

4
After the sensor is connected, the following
window appears.
The Main pane appears on the Edit pane. The
sensor starts up in RUN mode.
Adding a sensor to a project
After the project is created, additional sensors can be added to the project.

Explorer pane

Entering project information

Comments about the project can be entered.

Explorer pane
 Edit pane
1
Enter comments for the project in the [Comment] field.
ZW User's Manual
: [Device Group] (right click) | [Add]
: [Device Group] | [(Sensor Name)] (double click)
: [General Settings] icon ( )
Launching a project
55