Setting A Trigger Delay - Omron ZW-C1*AT User Manual

Setting a Trigger Delay

Setting a Trigger Delay p.104
Operating procedure
Steps Key operation
1 to 5 For moving to "HOLD", see steps 1 to 5 in p.318.
6
7
8
9
10
11
12
13
ZW User's Manual
Display Description
Press the
key.
Enable the delay.
"DELAY" is displayed on the main display and the current setting
value is displayed on the sub-display.
Press
Select "ON" and press the
Select the delay time.
Press the
key.
Set the delay time.
The current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
In this example, input "10", then press the
Press the key to return to the previous menu.
Select the sampling time.
Press the
key.
Set the sampling time.
The current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
In this example, input "10", then press the
Press the
/ keys to select "DELAY" and press the
/ key to enter editing mode and the sub-display blinks.
key.
/ keys to select "DLY.TIM" and press the
key to enter the editing mode, and the sub-display
/
/ keys to select "SMP.TIM" and press the
key to enter the editing mode, and the sub-display
/
key for two seconds to enter the RUN mode.
Setting the Output Conditions
/ / keys.
key.
/ / keys.
key.
321