Section 4
MAIN APPLICATIONS AND SETTING METHODS
Measuring Thickness
This section describes how to measure thickness, using the thickness of a steel plate as an
example.
When making settings while still connected to an external device, set the Amplifier Unit's judgement output
hold input to ON so that the output to the external device remains unchanged.
Adjust linearity before performing this operation.
Adjusting Linearity, p. 54
Flow of Operation
Mounting to
Device
ZX-E
74
Operation Manual
Steel plate
(If required)
Adjusting Setting
Preventing Mutual
Distances
Interference
Setting
Setting Tolerance
Expressions
Judgement Values