Setting Communications Specifications (Ethernet/Ip) - Omron ZW-C1*AT User Manual

Connectable Controller Models
Series
SYSMAC NJ NJ501 or NJ301
SYSMAC CJ2 CJ2H or CJ2M
SYSMAC CJ1 CJ1H or CJ1G
CJ1M
SYSMAC CS CS1H, CS1D, or CS1G

Setting Communications Specifications (EtherNet/IP)

Network Settings of the Sensor
This section describes how to set the network settings in the Displacement Sensor.
 Explorer pane
: [Device group] | Sensor name | [System] | [System data] (Double-click)
 Edit Pane
: [Ethernet communication settings] Icon | [Ethernet settings]
The following items can be set.
Item
IP address
Subnet mask
Default Gateway
ZW User's Manual
CPU Unit
Built-in port in CPU Unit
Compatible
Compatible (model with built-in
port only)
---
---
---
Description
Set the IP address of the Displacement Sensor.
Set the subnet mask.
Sets the default gateway.
Interface
EtherNet/IP Unit
CJ1W-EIP21
CJ1W-EIP21
CJ1W-EIP21
CJ1W-EIP21
CS1W-EIP21
Setting range
a.b.c.d
a: 1 to 223, b: 0 to 255,
c: 0 to 255, d: to 254
(Default: 192.168.250.50)
0.0.0.0 to 255.255.255.255
(Default: 255.255.255.0)
0.0.0.0 to 255.255.255.255
(Default: 0.0.0.0)
EtherNet/IP Connection
203