Omron ZW-C1*AT User Manual page 108

Setting the Offset
Set this item to set the reference value by a zero reset to a value other than zero.
Item Setting item
Zero reset Offset
 Explorer pane
 Edit pane
 Task Settings window : [Zero reset]
1
Set [Status] to ON.
Setting the Status p.105
Important
Offset can be set only when [Status] is set to ON.
2
Enter an offset value at [Zero reset] - [Offset].
Note
The offset can also be set by the operating keys on the Sensor Controller.
Setting the Offset p.323
106
Setting the Output Conditions
Setting value
-999.999999 to 999.999999 [mm]
(default value: 0)
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
Set the offset value.
)
ZW User's Manual