Setting Up No-Protocol Communications - Omron ZW-C1*AT User Manual

Setting Up No-protocol Communications

Setting Network Settings in the Sensor
This section describes how to set the network settings in the Displacement Sensor.
 Explorer pane
: [Device group] | Sensor name | [System] | [System data] (Double-click)
 Edit Pane
: [Ethernet communication settings] icon (
The following items can be set.
Item
IP address
Subnet mask
Default Gateway
ZW User's Manual
Description
Set the IP address of the Displacement Sensor.
Set the subnet mask.
Sets the default gateway.
) | [Ethernet settings]
Setting range
a.b.c.d
a: 1 to 223, b: 0 to 255,
c: 0 to 255, d: to 254
(Default: 192.168.250.50)
0.0.0.0 to 255.255.255.255
(Default: 255.255.255.0)
0.0.0.0 to 255.255.255.255
(Default: 0.0.0.0)
No-protocol Connection
227