Omron ZW-C1*AT User Manual page 327

Setting the Zero Reset Memory
Setting the Zero Reset Memory p.108
As an example, here is an explanation of the procedure for selecting the "ON" (enabled) zero reset memory
setting.
Operating procedure
Steps Key operation
1
2
3
4
5
ZW User's Manual
Display Description
Press and hold the
mode.
Press the
key.
Press the
Select zero reset memory ON/OFF.
The current setting value is displayed on the sub-display.
Press
In this example, select "ON" and press the
Press the
key for two seconds to enter the FUN
/ keys to select "SYSTEM" and press the
/ keys to select "ZER.MEM" and press the
key.
/ key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
Setting the Output Conditions
key.
325