Settings for Judgment Output
Assigning judgment output
Assigning judgment output p.145
As an example, the following explains the procedure for outputting the judgment results for TASK1.
Operating procedure
Steps
Key operation
1
2
3
4
5
6
342
Connecting Parallel I/O
Display
Description
Press and hold the
Press the
Press the
Press the
Select the task for which to output the judgment result.
The current setting value is displayed on the sub-display.
Press
In this example, select "TASK1" and press the
Press the
key for two seconds to enter the FUN mode.
/
keys to select "I/O" and press the
/
keys to select "JUDGE" and press the
/
keys to select "OUTPUT" and press the
/
key to enter editing mode and the sub-display blinks.
key for two seconds to enter the RUN mode.
key.
key.
key.
key.
ZW User's Manual