Omron ZW-C1*AT User Manual page 203

● Data Output after Measurements
Immediately after the measured value has been applied, the measured value data of each task is output
automatically to the specified I/O memory of the PLC specified to the input tag.
EtherNet/IP built-in unit
I/O memory or variables
(communications areas)
Output area
To output data, specify the I/O memory area or a variable (output area) on the PLC for storing that data in
advance to the input tag.
ZW User's Manual
PLC
EtherNet/IP (tag data links)
Displacement Sensor
Output connection to PLC
Data
Automatic output of measured
value data of each task
EtherNet/IP Connection
201