Omron ZW-C1*AT User Manual page 101

Item Setting item
Hold Hold mode
 Explorer pane
 Edit pane
 Task Settings window : [Hold]
1
Select the hold mode from [Hold mode].
Setting items for required parameters are
displayed depending on the selected hold
mode.
Setting Triggers p.101
Setting a Trigger Delay p.104
Note
The hold mode can also be set by the operating keys on the Sensor Controller.
Setting the Hold Mode p.318
ZW User's Manual
Setting value Description
Auto Peak to Holds the difference between the maximum and minimum values of the
Peak measurement result. The output changes every time the maximum or the
minimum value is updated.
0 0
Average Holds the "average of the measured value" of the sampling period. Output
changes after sampling, and this state is held until the next sampling ends.
Current
measured value
Sampling Holds the measured value the moment that control enters the sampling
period. Output changes at the start of sampling, and this state is held until the
next sampling is started.
Current
measured value
Through The hold function is not used. The measured value is always output.
(default value)
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Output
(Max.value - Min.value)
Current
measured value
Sampling period
Sampling period
)
Setting the Output Conditions
Output
(Average)
Output
99