Omron ZW-C1*AT User Manual page 242

Processing unit data setting command <DS command>
Change the setting data of the processing unit.
<Command format>
D S
↑
Space
<Response format>
Normal processing
O K CR
When a command was not successfully processed
E R CR
<Parameter explanation>
Parameter
Unit number
Data number
Setting value
Important
For unit numbers and data numbers, refer to "10-3 Processing Item Data List" (p.384).
240
No-protocol Connection
↑
Unit number
↑
Space
↑
Data number
↑
Space
Description
Specifies the unit number (0 to 255) to be acquired.
Specifies the data number (0 to 255) to be acquired.
This is the setting value of the specified data.
CR
↑
Setting value (N letter)
ZW User's Manual