Setting The Banks; Switching Banks - Omron ZW-C1*AT User Manual

9-9 Setting the Banks

Switching Banks

Switching Banks p.64
As an example, here is an explanation of the procedure for setting BANK2.
Operating procedure
Steps Key operation
1
2
3
4
5
326

Setting the Banks

Display Description
mode.
Press the
Press the
key.
Select BANK2 for the bank number.
The current setting value is displayed on the sub-display.
Press
Select "BANK2" and press the
Press and hold the
mode.
Press and hold the key for two seconds to enter the FUN
/ key to select BANK, then press the
/ key to select BK.CHG, then press the
/ key to enter editing mode and the sub-display blinks.
key.
key for two seconds to enter the RUN
key.
ZW User's Manual