Setting Up No-Protocol Communications - Omron ZW-C1*T User Manual

Setting Up No-protocol Communications

Setting Network Settings in the Sensor
This section describes how to set the network settings in the Displacement Sensor.
 Explorer pane
 Edit Pane
The following items can be set.
Item
IP address
Subnet mask
Default Gateway
170
No-protocol Connection
: [Device group] | Sensor name | [System] | [System data] (Double-click)
: [Ethernet communication settings] icon (
Description
Set the IP address of the Displacement Sensor.
Set the subnet mask.
Sets the default gateway.
) | [Ethernet settings]
Setting range
a.b.c.d
a: 1 to 223, b: 0 to 255,
c: 0 to 255, d: to 254
(Default: 192.168.250.50)
0.0.0.0 to 255.255.255.255
(Default: 255.255.255.0)
0.0.0.0 to 255.255.255.255
(Default: 0.0.0.0)
ZW User's Manual